Who we work with
Industrial & Warehousing
IT support for production floors and warehouses, covering shift schedules, equipment vendor requirements, shared devices and wireless coverage.
Common challenges in this sector
- The floor runs in shifts, so changes have to happen between them.
- Machines come with computers attached, running vendor software on an operating system with vendor restrictions on updates.
- Wi-Fi coverage is a physical problem. When the racking moves, the dead spots move too.
- Scanners, label printers and floor terminals are shared, dropped and used with gloves on.
- The ERP or warehouse system sets the rules, and paper and spreadsheets fill the gaps around it.
- Office, warehouse and yard share one network that grew a switch at a time.
- Large customers and prime contractors send supplier questionnaires about your security controls.
An IT outage on a production or warehouse floor can interrupt a shift, delay a shipment or stop a run. We plan support and changes around the operating schedule, the equipment vendor’s requirements and the time available for a tested rollback.
Uptime is measured in shifts
Changes that would be routine in an office, like rebooting a firewall, replacing a switch or rebuilding a workstation, have to happen between shifts, at changeover, during a shutdown or on a weekend. Sometimes the only real window is the annual maintenance period.
Anything that touches the floor needs a tested fallback and an agreed point at which you stop and roll back. Work that doesn’t touch the floor, such as accounts, licensing, backup checks and office devices, can go ahead as normal. Keeping the two separate helps maintenance fit the operating schedule.
Support hours matter for the same reason. If the afternoon shift loses its scanners at six, that can’t wait until morning. It’s better to agree on this when support is set up than to find out the first time it happens.
Computers controlled by equipment vendors
Production equipment may have an attached PC running the vendor’s control or inspection software. The operating system can be out of support, with updates restricted by the equipment vendor. We confirm those restrictions and the supported upgrade options before changing the computer.
Where updates aren’t supported, we review network isolation, access and backups with the vendor. The equipment may need its own network segment, limited traffic and no general web browsing or file-share access. Those controls reduce exposure while a supported upgrade or replacement is planned.
The same goes for anything else whose configuration belongs to a vendor: inspection systems, scales, label applicators, building and access control. A list of which of these you have, who supports them and how they’re reached is part of the site’s IT documentation.
Coverage is a physical problem
Wi-Fi in a warehouse behaves nothing like Wi-Fi in an office. Metal racking reflects the signal and stock absorbs it. A survey done when the building was half empty won’t match your coverage in the busy season. Ceiling height matters, aisles act like corridors, and a mezzanine, a freezer and an outdoor yard each cause their own problems.
Scanners show the problem first. When a handheld drops its connection mid-aisle, the transaction is lost or someone has to walk back. The fix tends to be physical: where the access points go and how many there are, antenna choice, channel planning, and roaming set up so a device moving at walking pace can move between access points. We check coverage with the racking loaded and review it when the layout changes.
Devices that are shared, dropped and used with gloves on
Floor hardware is a different class of equipment from office hardware. Rugged handhelds, vehicle-mounted terminals, label and thermal printers, receiving kiosks, and PCs in places with dust, vibration or temperature swings no desktop was built for.
These devices are also shared, and that’s what needs attention. Devices passed from one shift to the next tend to end up on one generic login. That’s understandable, since staff need to sign in quickly with gloves on. We separate what has to be tied to a person from what doesn’t. You keep a record of who did what where it matters, and signing in stays quick everywhere else.
Spares matter more than in an office. A broken handheld means someone can’t work, so the question is how fast you can put a configured replacement in their hand. That’s a good argument for devices that are enrolled and set up from policy, not configured by hand.
The warehouse system, and the work around it
An ERP, a warehouse management system, or a production or dispatch system is central to the site’s operations. We check its vendor’s requirements and support terms, then plan the surrounding systems accordingly.
The place to look is the work that’s grown up around it. A spreadsheet that re-types orders because two systems don’t talk. A printed sheet carried to the floor because the system has no usable mobile view. A report built by hand every Monday because the data sits in three places. A count reconciled after the fact, when it could be captured as it happens.
We measure the time those workarounds take and compare a small integration or purpose-built tool with the cost of replacing the system.
One network from the office to the yard
Office, plant and yard often share a network that grew one switch at a time, in cabinets placed wherever there was space. Long cable runs may need fibre, and the route and connections may be undocumented. Outbuildings and the yard are connected with whatever worked at the time.
We review which systems need separate network access: production equipment, floor devices, office computers, guest and contractor access, cameras and building systems. Segmentation limits the connections between them. We also document cabinets, cable runs and fibre links, and check what happens if a switch or Internet connection fails. The cost of that downtime helps determine whether a second connection is justified.
Answering supplier questionnaires
Large customers, prime contractors and insurers increasingly ask suppliers to describe their security controls, and in this sector the request often comes with a purchase order. Most of what’s asked is standard, and it’s covered under cybersecurity.
What’s specific to industrial sites is the equipment covered above. A questionnaire may ask about unsupported operating systems. Your answer needs to identify those machines and explain the controls around them, including segmentation and monitoring.
Related services
The work described above is delivered through these services. You can also hire us for any one of them on its own.
Managed IT
Day-to-day support, Microsoft 365 and Google Workspace administration, device management and website hosting for organizations without a full internal IT team.
IT Consulting
IT assessments, architecture and roadmaps to help you decide what to change, what it will cost and where to start.
App Development
Business applications, websites, integrations and automation, built around the way your organization works.
Communications
Teams Phone, cloud voice, business Internet and mobile services, planned and supported alongside the rest of your IT.
When can your floor afford downtime?
Tell us what runs on the floor and when things are quiet, and we'll plan the work around your shifts.